Milling machine precautions

1. In order to make the Raymond mill operate normally, the "Equipment Maintenance Safety Operation System" should be formulated to ensure the long-term safe operation of the Raymond mill, and necessary maintenance tools, grease and corresponding accessories should be available.
2. When the roller device of the Raymond mill is used for more than 500 hours and the roller is replaced, the rolling bearings in the roller sleeve must be cleaned, the damaged parts should be replaced in time, and the refueling tool can be a manual refueling pump.
3. During the use of the Raymond mill, there should be a fixed person responsible for the supervision, and the operator must have a certain technical level. Before the installation of the Raymond mill, the operator must be given necessary technical training to understand the principle and performance of the Raymond mill and be familiar with the operating procedures.
4. After the Raymond mill has been used for a period of time, it should be overhauled. At the same time, the grinding roller, grinding ring, scraper and other wearing parts should be overhauled and replaced. The connecting bolts and nuts of the grinding roller device should be carefully checked before and after use to see if there is any looseness and whether the lubricating grease is sufficient.